![]() ![]() The twist drill fit the hole perfectly and the groove in the drill allowed more adhesive to reach the opening, while improving its grip.Įven though the quick-setting epoxy cures in just a few minutes, I let it set for about 3 hours before trying to remove the broken stub. It turns out that neither the wire or sewing needle created a strong enough bond to remove the broken plug. Actually, I tried both of the latter, using super glue on a first attempt, followed by epoxy on a second. Thousands of new images every day Completely Free to Use High-quality videos. ![]() You may be wondering why I chose to sacrifice the drill by gluing it back into the stub, rather than gluing say a wire or sewing needle into the pilot hole. Download and use 20000+ Broken Piece Of Mirror stock photos for free. Only then did I carefully insert the drill back into the pilot hole in the broken tab. Be sure the device is sufficiently powered up or plugged into an outlet to install. The iPhone or iPad will download and install the iOS software update, and reboot a few times in the process. When iOS 11.2.5 appears, choose to Download and Install. I held the twist drill by its end for about 20 seconds and let any excess epoxy drip from the tip. Open the Settings app and go to General, and then choose Software Update. Then I mixed some fast setting epoxy and rolled approximately 3/8 inch of the tip of the twist drill in the mixed epoxy. I carefully inserted the masking tape as far into the port as I could, and used a toothpick to press it down lightly. I cut a strip of masking tape about 1 inch long and exactly the width of the lightning port to protect the bottom side of the port from dripping adhesive. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |